Previous Thread
Next Thread
Print Thread
Rate Thread
Weird A/F readings... #88386
March 01, 2000 11:06 am UTC
March 01, 2000 11:06 am UTC
Joined: Jan 2000
Posts: 30
C
Clemens Leung Offline OP
Member
Clemens Leung  Offline OP
Member
C
Joined: Jan 2000
Posts: 30
I was bored so I took out my lower honeycomb in my MAS...now my Cyberdyne shows no bars at idle. If I give it gas the LEDs light up like normal and bounces, and at WOT it shows rich. Before I took out the honeycomb the LEDs would bounce at idle. Is this 'bad'? Any danger to running lean at idle?

Re: Weird A/F readings... #88387
March 01, 2000 01:19 pm UTC
March 01, 2000 01:19 pm UTC
Joined: Jan 1970
Posts: 4,971
Beamsville, Ont, Canada
Steve Kinnaird Offline

Senior Member, with Far TOO Much Time on Their Hands
Steve Kinnaird  Offline

Senior Member, with Far TOO Much Time on Their Hands
*****
Joined: Jan 1970
Posts: 4,971
Beamsville, Ont, Canada
Don't worry. It's just one of the side effects of removing the lower H/C.

No harm done...

------------------
1992 Eagle Talon Tsi FWD
Superiority after 60'..


ICQ # 9622983
www3.sympatico.ca/steve.kinnaird


Now, I'll have all kinds of time to talk about DSMs, because I won't be busy fixing mine!
Re: Weird A/F readings... #88388
March 04, 2000 11:10 pm UTC
March 04, 2000 11:10 pm UTC

A
Anonymous
Unregistered
Anonymous
Unregistered
A


Mine does the same thing, shows only 1 bar or none. That's after almost 2 years.


Powered by UBB.threads™ PHP Forum Software 7.6.1.1