Previous Thread
Next Thread
Print Thread
Rate Thread
2G fuel pump rewire #8936
February 14, 2000 04:26 pm UTC
February 14, 2000 04:26 pm UTC

A
Anonymous OP
Unregistered
Anonymous OP
Unregistered
A


Rewired my FP this weekend and got to thinking...

I'm using the original power wire to trip the relay and then ground it. Would it make sense to put a resistor after the relay before the ground, a resistor say equal to the load the pump would take or more or less????

I only know enough about electronics to be dangerous. [Linked Image]

------------------
Corey Kaye
1998 Eagle Talon TSi

Re: 2G fuel pump rewire #8937
February 15, 2000 05:05 pm UTC
February 15, 2000 05:05 pm UTC

A
Anonymous OP
Unregistered
Anonymous OP
Unregistered
A


Sense no one replied i've got another question (and they'll keep coming until someone replies !!!).
[Linked Image] [Linked Image]

Why are people only re-wiring the positive and not the negative? This doesn't make sense, you have to run the wire from the battery back anyway, why not make it two? Also, if the ground is weak it'll also keep the full 12-14v from coming back...

Surely i'm not the first to think of this....

------------------
Corey Kaye
1998 Eagle Talon TSi

Re: 2G fuel pump rewire #8938
February 16, 2000 04:30 am UTC
February 16, 2000 04:30 am UTC
Joined: Jul 1999
Posts: 397
Lasalle, Quebec
F
Francois Villeneuve Offline
Member
Francois Villeneuve  Offline
Member
F
Joined: Jul 1999
Posts: 397
Lasalle, Quebec
Errrr, the whole body of the car is negative. If you pop the hood and look at the battery, you'll notice that the negative terminal is connected to the body. I'd say that the body of the car is a pretty big wire! That's why you only need to use 1 wire when you connect something. Just run a wire to the body and you have your negative. I did use a piece of 10 gauge between the relay and the car body.

------------------
Francois Villeneuve
Le Talon
Working on it...


Talon Tsi 95, 11.32@131.8MPH
Re: 2G fuel pump rewire #8939
February 16, 2000 12:14 pm UTC
February 16, 2000 12:14 pm UTC

A
Anonymous OP
Unregistered
Anonymous OP
Unregistered
A


I'll have to take a close look... I know there are like 4 or so wires around the FP. One of those skinny bastards is the + which we all agree is to small to do the job so we re-wire it. Well, one of the remaining three is the ground, it's just as skinny. I'm not sure where it grounds to the car but it doesn't to it right away. I could check my electrical book unless someone knows...

------------------
Corey Kaye
1998 Eagle Talon TSi

Re: 2G fuel pump rewire #8940
February 16, 2000 06:25 pm UTC
February 16, 2000 06:25 pm UTC
Joined: Jul 1999
Posts: 397
Lasalle, Quebec
F
Francois Villeneuve Offline
Member
Francois Villeneuve  Offline
Member
F
Joined: Jul 1999
Posts: 397
Lasalle, Quebec
I'm not saying that the stock ground is connected to the body. I'm just saying that when I rewired the pump, I used a 10 gauge wire for postive and a 10 gauge 1 foot long wire for ground, on the car's body...

I logged my O2 before and after the rewire and I did see a difference.

YMMV!

------------------
Francois Villeneuve
Le Talon
Working on it...


Talon Tsi 95, 11.32@131.8MPH
Re: 2G fuel pump rewire #8941
February 16, 2000 06:29 pm UTC
February 16, 2000 06:29 pm UTC

A
Anonymous OP
Unregistered
Anonymous OP
Unregistered
A


so you did (somewhat) rewire the -.

Humm... thanks.

------------------
Corey Kaye
1998 Eagle Talon TSi


Powered by UBB.threads™ PHP Forum Software 7.6.1.1