I'm finally posting the pics I promised I would have. Info about my turbo kit. I've pieced together my kit which basically consists of parts that would come from the Star Performance Turbo Kit.

I brought my car to my buddies shop early morning this is what she looked like.
[img]http://images.snapfish.com/34358%3A5923232%7Ffp58%3Dot%3E232%3C%3D4%3B%3C%3D759%3DXROQDF%3E23237%3B%3A%3A6459%3Bot1lsi[/img]
I was really excited to finally start installing the turbo kit I pulled off the front end with in 5mins. [img]http://images.snapfish.com/34358%3A5923232%7Ffp63%3Dot%3E232%3C%3D4%3B%3C%3D759%3DXROQDF%3E23237%3B%3A%3A77557ot1lsi[/img]
Once the front end was stripped we bolted on the Star FMIC
[img]http://images.snapfish.com/34358%3A5923232%7Ffp63%3Dot%3E232%3C%3D4%3B%3C%3D759%3DXROQDF%3E23237%3B%3A%3A77565ot1lsi[/img]
Then we removed the stock exhaust header and the best part was trying to remove the downpipe from the cat :rolleyes: . This is when the torch came in handy . We unbolted the oil pan tapped it for the return fitting cleaned it out to get rid of all the shavings(sorry no pics). We installed the Star turbo manifold, Turbonetics T3/T04 Turbocharger(.63AR T3 Hotside with a 50 trim wheel), Deltagate Mark II Wastegate and 2.75" Exhaust Down Pipe. And since I didn't have any gaskets for in between the mani and turbo, and turbo and downpipe my buddy had a sheet of metal which is used to make your own gaskets(not sure what its called)so I traced out flanges and cut out the gaskets.
[img]http://images.snapfish.com/34358%3A5923232%7Ffp63%3Dot%3E232%3C%3D4%3B%3C%3D759%3DXROQDF%3E23237%3B%3A%3A77577ot1lsi[/img]
Removed the oil perssure sensor switch (located at the back of the block its the last sensor closest to the tanny housing) Place a T fitting size is 3/8" NPT in the location of the oil pressure switch and place the pressure switch to the other end and place a fitting at the top that will fit with the braided SS hose that goes to the turbo. (fitting were purchased at Cisco in Mississauga Dixie just north of 401)
[img]http://images.snapfish.com/34358%3A5923232%7Ffp63%3Dot%3E232%3C%3D4%3B%3C%3D759%3DXROQDF%3E23237%3B%3A%3A7758%3Bot1lsi[/img]
Bought the couplings at EuroSpeed (near Dufferin and Dupont) Installed all the piping.
[img]http://images.snapfish.com/34358%3A5923232%7Ffp45%3Dot%3E232%3C%3D4%3B%3C%3D759%3DXROQDF%3E23237%3B%3A%3A77582ot1lsi[/img]