Well, here's this weekend's progress. It's just about ready for paint.

What's left:

Mark holes to be kept and the rest to be filled in
Pull the heater core
Remove some of the subframe for powdercoat

Car goes to paint on a flatbed next week (4th).

Here's how the car sits now:






I was cutting out those POS Cowls out around the fog lights, the handle of my sissors broke. Out of frustration, I threw them towards the house.....



My Fiancée wasn't too pleased.....

So, next week while it's at paint, the plans are to go through the harness and start pulling wires we don't need. We're also going to be relocating the fuse box into the glove compartment, so shortening of the wires and extending the rest should be fun.

We've got a healthy sized box of parts to go to powdercoat as well, and we're also going to be tearing into the motor soon as well. It's got low compression, and we need to find out why.

This week is going to be a bit of a slow go as I'm going to be busy as hell. The following week we're going to try and get as much done as possible, and the week after, we're both on holidays to get the motor in and the car running.