I'm confused what you have, cause you mention the cable for the clutch was replaced?, and then you mentioned the hydraulics were replaced?, its one or the other, on a Talon TSI it is hyraulic. You mentioned you have a buddy clutch?, do you mean that you have a Bully Clutch - Bully is located in Ottawa, ON., and will rebuild the surfaces. Many things can cause clutch issues.

- Bent clutch fork
- Worn povit ball
- Separated throwout bearing - usually heard
- Air in hydraulics/ bad slave, worn bore on slave, bend rod.
- Clutch pedal assembly - not so common on a 2Gen
- Bad/incorrect flywheel resurfaceing - noticed upon install though.
- Missing starter plate - noticed upon install
- Separated clutch friction surfaces
- Bent presure plate fingers
- Broken clutch spring - usually heard
- Bad adjustment

There are other things aswell, but CT won't find the problem.

EDIT: "rebuilt" take that with a grain of salt, there are many levels of being rebuilt.