So I started working on the shrouds today after work. I have one done there now, and after posting this I'll be going to do the 2nd.

Here's a shot of the modified shroud. It fits really nice and I'm HOPING that none of the visable edges will be roughed up from the grinding. I used 3m tape to cover it all before handling it.



Note that the depth of the flat portion on the bottom view has quite a bit of meat taken off of it. I pretty much just cut the top of the shroud, ground some of the outside diameter off, and took some depth out of the flat part as I mentioned above...



Test fitted. Looks sweet I think. The real challenge will be making the second one look identical to this one