Hey guys, I recently pulled my transfer case and noticed the output shaft had some in/out play. About 1/4" to 3/8". But no oil leaks.
I've read about the 2 balls that sit under the viscous coupling and how if they are missing it could cause the shaft to move.
I've also noticed a small leak under the tranny. I thought it was the rear main seal. I removed the flywheel inspection plate and found no oil anywhere.
With x-member out and the gusset removed, I was able to inspect the leak further. It looked like it was coming from the pass. side drive axle seal.
Can anyone shed some light?