Alright, it's official the boards are all drawn.

I'll get some boring number out of the way first thing.
The tails lights will have 138 LEDs per side for brake/marker lights, 66 LEDs per side for turn signals and 147 LEDs for the center section.
The tail lights will pull 2.8A and the center section pulls 3.43A. Everything is voltage regulated to 9V.

I've spent hours and hours on the AutoCAD drawings for the boards. A lot of times I'd print something, cut it out and test fit it. I'd not any changes needed make them and try again. Here's a picture of this process:



The center section and bumper markers where by FAR the hardest for me to draw.


I called a local Industrial supply place this week and found out they had 1mm drill bits in stock so I went and got a bunch. Check out how small these things are!


I also picked up a Dremel Work Station which will function as a drill press.


I need to order more PCB boards, resistors, etching supplies, etc.
I'm also trying to contact the person I originally bought my PWMs from as I'm doing something different and can't use them now. If I can't get a hold of them I'll have to design my own.
I'm also working on the details for my sequencers (all my turn signals will be sequential) from another HIDP member.

That's it for now!