I'm resurrecting an old post.

A while back I decided I wanted to convert all my brake lines to stainless braided. One solution was the STM kit, but for starters, that's just the front lines and also their lines go right to the caliper.
The problem with this is:
- you don't really have a proper attachement point at the shock
- you'd have to replace the flex lines at the caliper (which in many cases would already be upgraded stainless braided).

The line kit I'm putting together retains the flex lines at the calipers (in my case aftermarket stainless braided, though they'd work the same for stock rubber). I've already got the lines for the front brakes and the lines that go to/from the master cylinder to the prop valve. They're now installed on my 2g. I've just ordered the ones for the rear lines. They should be in a couple of weeks.

After I install everything and see how it all fits (line lengths, etc) we (meaning RTM) may offer such a kit for sale. Initially it would just be for 2g's since we don't have a 1g to work with. We'll keep you posted.