Re: Abs removal, proportioning valve needed?
[Re: Paul Bratina]
#380832
August 06, 2012 05:22 pm UTC
August 06, 2012 05:22 pm UTC
|
Joined: Aug 2010
Posts: 2,808 Ontario, Canada
Salomon Ponte
Insane Member
|
Insane Member
Joined: Aug 2010
Posts: 2,808
Ontario, Canada
|
I'm resurrecting an old post.
A while back I decided I wanted to convert all my brake lines to stainless braided. One solution was the STM kit, but for starters, that's just the front lines and also their lines go right to the caliper. The problem with this is: - you don't really have a proper attachement point at the shock - you'd have to replace the flex lines at the caliper (which in many cases would already be upgraded stainless braided).
The line kit I'm putting together retains the flex lines at the calipers (in my case aftermarket stainless braided, though they'd work the same for stock rubber). I've already got the lines for the front brakes and the lines that go to/from the master cylinder to the prop valve. They're now installed on my 2g. I've just ordered the ones for the rear lines. They should be in a couple of weeks.
After I install everything and see how it all fits (line lengths, etc) we (meaning RTM) may offer such a kit for sale. Initially it would just be for 2g's since we don't have a 1g to work with. We'll keep you posted. I'd offer up my car for 1G fitting. That being said, braided lines flex...hard lines don't.
'92 Talon TSi AWD - 5 Speed/E16G/12.385s @ 115.13mph
|
|
|
Entire Thread
|
Abs removal, proportioning valve needed?
|
Rob Cauduro
|
November 24, 2011 02:13 am UTC
|
Re: Abs removal, proportioning valve needed?
|
Rob Strelecki
|
November 24, 2011 02:44 am UTC
|
Re: Abs removal, proportioning valve needed?
|
Rob Cauduro
|
November 24, 2011 02:45 am UTC
|
Re: Abs removal, proportioning valve needed?
|
Jeff Mitchell
|
November 24, 2011 06:07 pm UTC
|
Re: Abs removal, proportioning valve needed?
|
Reza Mirza
|
November 24, 2011 07:01 pm UTC
|
Re: Abs removal, proportioning valve needed?
|
Rob Cauduro
|
November 24, 2011 07:47 pm UTC
|
Re: Abs removal, proportioning valve needed?
|
Jeff Mitchell
|
November 24, 2011 09:31 pm UTC
|
Re: Abs removal, proportioning valve needed?
|
Paul Bratina
|
November 25, 2011 02:36 pm UTC
|
Re: Abs removal, proportioning valve needed?
|
Jeff Mitchell
|
November 25, 2011 04:55 pm UTC
|
Re: Abs removal, proportioning valve needed?
|
Rob Cauduro
|
November 26, 2011 04:44 pm UTC
|
Re: Abs removal, proportioning valve needed?
|
Rob Cauduro
|
November 26, 2011 01:22 am UTC
|
Re: Abs removal, proportioning valve needed?
|
Rob Cauduro
|
November 26, 2011 01:24 am UTC
|
Re: Abs removal, proportioning valve needed?
|
Chris Mckee
|
November 26, 2011 05:37 am UTC
|
Re: Abs removal, proportioning valve needed?
|
Tyler Minshall
|
November 29, 2011 06:51 pm UTC
|
Re: Abs removal, proportioning valve needed?
|
Rob Cauduro
|
November 29, 2011 07:01 pm UTC
|
Re: Abs removal, proportioning valve needed?
|
Jeff Mitchell
|
November 29, 2011 07:23 pm UTC
|
Re: Abs removal, proportioning valve needed?
|
Rob Cauduro
|
November 29, 2011 07:39 pm UTC
|
Re: Abs removal, proportioning valve needed?
|
Ziggy Dietrich
|
November 29, 2011 07:39 pm UTC
|
Re: Abs removal, proportioning valve needed?
|
Rob Cauduro
|
November 29, 2011 08:27 pm UTC
|
Re: Abs removal, proportioning valve needed?
|
Ziggy Dietrich
|
November 29, 2011 09:23 pm UTC
|
Re: Abs removal, proportioning valve needed?
|
Rob Cauduro
|
November 29, 2011 09:35 pm UTC
|
Re: Abs removal, proportioning valve needed?
|
Joe Esmama
|
November 30, 2011 08:05 am UTC
|
Re: Abs removal, proportioning valve needed?
|
Ziggy Dietrich
|
November 30, 2011 03:15 pm UTC
|
Re: Abs removal, proportioning valve needed?
|
Rob Cauduro
|
November 30, 2011 03:54 pm UTC
|
Re: Abs removal, proportioning valve needed?
|
chris esquejo
|
November 30, 2011 04:08 pm UTC
|
Re: Abs removal, proportioning valve needed?
|
Rob Cauduro
|
December 08, 2011 10:16 pm UTC
|
Re: Abs removal, proportioning valve needed?
|
Ziggy Dietrich
|
December 09, 2011 03:06 pm UTC
|
Re: Abs removal, proportioning valve needed?
|
Jeff Mitchell
|
December 10, 2011 09:32 pm UTC
|
Re: Abs removal, proportioning valve needed?
|
Andrew Trapp
|
December 10, 2011 01:59 am UTC
|
Re: Abs removal, proportioning valve needed?
|
Rob Cauduro
|
December 10, 2011 04:52 am UTC
|
Re: Abs removal, proportioning valve needed?
|
Paul Bratina
|
December 11, 2011 12:11 am UTC
|
Re: Abs removal, proportioning valve needed?
|
Ziggy Dietrich
|
December 11, 2011 02:32 pm UTC
|
Re: Abs removal, proportioning valve needed?
|
Ziggy Dietrich
|
January 14, 2012 07:06 pm UTC
|
Re: Abs removal, proportioning valve needed?
|
Jeff Mitchell
|
June 03, 2012 01:20 am UTC
|
Re: Abs removal, proportioning valve needed?
|
Ziggy Dietrich
|
June 03, 2012 02:05 pm UTC
|
Re: Abs removal, proportioning valve needed?
|
Andrew Trapp
|
June 04, 2012 04:06 pm UTC
|
Re: Abs removal, proportioning valve needed?
|
Jeff Mitchell
|
June 04, 2012 04:36 pm UTC
|
Re: Abs removal, proportioning valve needed?
|
Ziggy Dietrich
|
June 04, 2012 04:48 pm UTC
|
Re: Abs removal, proportioning valve needed?
|
Paul Bratina
|
August 06, 2012 02:29 pm UTC
|
Re: Abs removal, proportioning valve needed?
|
Salomon Ponte
|
August 06, 2012 05:22 pm UTC
|
Re: Abs removal, proportioning valve needed?
|
Rob Cauduro
|
August 06, 2012 02:48 pm UTC
|
Re: Abs removal, proportioning valve needed?
|
Stephen Richardson
|
August 06, 2012 06:01 pm UTC
|
Re: Abs removal, proportioning valve needed?
|
Paul Bratina
|
August 06, 2012 07:25 pm UTC
|
Re: Abs removal, proportioning valve needed?
|
Stephen Richardson
|
August 06, 2012 10:51 pm UTC
|
Re: Abs removal, proportioning valve needed?
|
Ziggy Dietrich
|
August 06, 2012 11:12 pm UTC
|
Re: Abs removal, proportioning valve needed?
|
kent Hennigar
|
August 07, 2012 01:45 am UTC
|
Re: Abs removal, proportioning valve needed?
|
Manny Sandhu
|
September 29, 2017 01:14 am UTC
|
Re: Abs removal, proportioning valve needed?
|
Stephen Richardson
|
September 30, 2017 03:23 pm UTC
|
|
|
|