So i have completed the clutch and flywheel job but i have hit a bit of a snag

When i press the clutch the last 1/8thish it is significantly stiffer than the feel when initially pressed down

Shifting is a lot smoother once the clutch is pressed all the way down a bit notchy when i dont put that extra pressure on the clutch pedal to complete the throw

Also when in gear and idling it does not seem that i have a dragging clutch but i will try putting it in first and taking it to 7000 rpm to see if it creeps forwards

When releasing clutch in first at a dead stop the car is a bit jumpy as i guess the engagement point is very close to the floor

Recap of new parts is
-new southbend stage 2 daily kit
-new fidanze flywheel with extended bolts and shim
-new aftermarket slave cylinder
-new throw out bearing

Hydraulic system was bled several times

Any help would be great kinda at a dead stop