So I was spending the last little while trying to find a wiring issue on my car. I am still searching for the cause but I got distracted because while searching last tuesday I heard a pop from under my seat, then when I pushed on the seat it was creaking like crazy. So I removed the seats, the rear bolts came out great but the fronts came out like this.



Needless to say I was pissed, so I made up a plate and put a bolt through it, welded the bolt to the place and then tossed it in on ones side, once the one side was done than I went on and did the other side.
I had picked up bondoglass because I am planning to fix up my roof, so I decided to use it cause I wanted to make sure the floor was flush with here it was before and I lap welded the pieces in so I needed to add a little bit.

After sanding it down and painting it it now looks like this and the seats are back in. While I made the glass I decided to plug my antenna hole too, and will post pics of that later.