Originally Posted by Mike Eng
It looks like the fuse is connected in parallel from that angle. Should be in series from the amp. But that might be just the angle.

Far easier to make a bracket that clamps the maf sensor for another spot to secure the intake. When I had a maf, I got creative with just a 3mm thick 1"x8" piece of metal, a drill and bench vise, hammer, nuts and bolts. Was basically an "L" bracket that bolted to the maf and bolts to the frame rail. Just an easy, hidden spot. It Worked great too!

Just an idea if you have scrap metal kicking around.


Thats a good idea actually. Post some pics if have them kicking around

1996 Eagle Talon TSi AWD
1999 Eclipse GST Automagic
1991 3000GT VR-4