Not much of an update but i finally got my remote entry working again with factory remote. My factory door actuators were seized and couldn't open any of my locks. For this project I used aftermarket door actuators which cost me under 10 dollars shipped from amazon. Usually I purchase OEM parts but Mitsu charges 135+$ per side that also includes entire door lock that i don't need.

Few notes regarding installation:
Small hole needs to be drilled on the door to mount aftermarket actuator.
Green wire on the actuator goes to blue/black factory wire and blue wire goes to red/blue factory wire. Factory alarm, door lock/unlock button, and remote entry is all working correctly with this mod. I followed write up on dsm tunners to get this done. There are total of 5 wires going to factory actuator, i left other 3 untouched.














I can now use remote to open doors. Still need time to get used to it instead of using the key