AFPR in. Everything buttoned up..

Take her out. Mash throttle. Pulls nice till about 12-15 PSI then nothing. Just holds 15psi and is forcing to accelerate. She is making tons of noise.

I will need to check for boost leaks again (I checked up to 10PSI. I am scared of my BLT :P). Though if it was boost leak, AFR would read Rich. Not Mass Lean. As I get closer to 15 PSI.. AFR numbers go up and then to ---.

I suspect I just need to retune now with proper base fuel pressure and she is so lean she can't make power. I dunno. Hopefully not faulty AFPR. >.>

I just want to put old FPR in and drive