I'm not sure if this is a bad thing or not, going to go with bad thing. Here are my spark plugs. Having some tuning done remotely and car seems to be fine. Get on the boost after baseline tune and car is brutal now, smoke and leaning out.




If I'm reading my tool correctly, they are gapped to .035. Im assuming those are how they came and never got gapped properly.

What plugs should I be running? It was suggested that I run br7es because of my desired boost levels of 20-25 psi on an evo 3 16g. Once I determine which plugs to run, they should be gapped at .028 correct?

I will upload my log in another post, this one is getting clustered already enough