Lol Stephen. It's because I never got the gasket kit for the valve cover and it leaks a little as it is. Didn't want to disturb anything.

I was going to wait, but I managed to get the bolts off

The back one scared me having to use two box wrenches to get leverage.

Everything is almost back together. I am getting conflicting In/Pound tension setting for the tension pulley on the belt.

Some say 24. Jafro says 26.4 Service Tech manual says 31. Seeing my Torque wrench only goes as low as 30 inch pounds. I did 30. I have to still put the hydraulic tensioner on, test and reassemble everything.