I found a neat trick for proper tension. Pulling on the happy face pulley tool, soon as the pin in the auto tensioner gets a little loose, back off ever so slightly and tighten tensioner pulley bolt to 27 ft/lbs. The pin should be snug to pull out.

The auto tensioner with pin in is at 0.15 inch. Which is in the area they wanted 0.15 to 0.18 for operation.

Last edited by Charles Lavoie; November 14, 2016 03:23 pm UTC.
98,6Bolt,3"EXH,LINKV3,780cc,SD,SCM61@26PSI, 340LPH,AFPR,TSBOV,REARWB,FMIC,2"RAD(20/80/WW)