Extremepsi 2.5" ID silicone 90 elbow, black, leg length ~4", top quality that can handle real boost (not ebay junk, cost $50+). Brand new, never run, small spot of grey rtv on it $20



Southbend SS Pressure Plate (2200lb) & TZ/FE disk. PP is in great shape but has a slight taper, ~.013 (used PP should be machined anyway). Disk has a matching taper on the PP side ~.282 thick at outer edge (thinnest portion). Say an easy 50% life left at thinnest portion, didn't have any issues holding my DTM83HTA @30psi. Run as is, or machine PP & use a new disk, $80







3mm wheel spacers, 5x114.3mm & 5x108mm, 67.1mm bore. Bought them, & mounted to find out they wouldn't work for me, paid $80, $50



K&N cone Filter, 6" long filter, with a 4.5" inlet size (works with stock MAF adapter),PN RU-3480 $30





2g Keyless FOB, looks like these will currently run you $50+ from Ebay (with exchange & shipping) & are in worse condition. $30





Parts can be picked up in the Concord (~Hwy 7 & Dufferin) are or the Newmarket area depending on time, shipping is always available at buyers expense.