7 Bolt head on 6 Bolt Bottom

Print Thread

Rate Thread

7 Bolt head on 6 Bolt Bottom #453677 August 30, 2017 05:16 am UTC August 30, 2017 05:16 am UTC
Joined: Jun 2005 Posts: 398 Charlottetown PEI John MacPhail OP Serious Member
John MacPhail OP Serious Member Joined: Jun 2005 Posts: 398 Charlottetown PEI	Ok so I have a 92 6-4-auto, at this moment it is stock except the PO installed an ebay 16G and pretty purple ebay bov. To make a long story short engine smokes and i am going to do a freshen on it " rings, valves, seals ETC. Now I have a 7 bolt head, an evo 3 intake, 1G TB, 1G Bov and an old school 264/272 set of cams, evo beehive springs,TI retainers and a FP mani with a real MHI evo3 16. I was thinking of throwing it on because I think it will work better with the auto. Thoughts? I know I have to enlarge the head bolt holes, other than this does anyone know of any other problems or changes that need to be made? Thanks John Dinosaurs evolved and learned to fly This Dinosaur is evolving and learning to DSM

Hop To